Microsoft Support KB article on moving your DHCP scope(s) using netsh - link

Great table on the features of ActiveSync and what each client (device) can do, - Wikipedia

Trying to backup Exchange 2010 and purge transaction logs using the built-in Windows Server Backup app (Windows 2008).

- Backup completes but with warnings and log files won’t purge

-Found that the backup will run successful only if database files and the transaction log files on the same volume

Moved the transaction logs files via the EMC to the save volume as the databases and got past the consistency check failure issue, and got a good backup w/flushed logs.

For some reason when using Outlook, all of the saved names/email addresses in the Outlook cache (.nk2) file was not being read by Outlook 2010. When looking at the .nk2 file in \user\AppData\Roaming\Microsoft\Outlook it had been renamed to Outlook.nk2.old. When I renamed the .nk2 file back to Outlook.nk2 file, Outlook still would not use the autocomplete file. When having no .nk2 file Outlook didn’t create a .nk2 file either….weird. So, I found a way to import the .nk2 file in outlook: Close Outlook, go to the run window and type outlook.exe /importnk2

Microsoft Support KB - link

When users delete items from folders, outlook doesn’t seem to refresh the item list.  If you try and delete the item again, outlook throws an “unknown error” message.  If you delete an item and then navigate away from a folder or even use the navigation pane to display the same folder, the item list will refresh and remove the deleted message.

The issue is “The basic issue is that Outlook 2003 support UDP and polling notifications. Exchange 2007 supports UDP, polling and Async notifications. Exchange 2010 only supports polling and Async notifications. This means when Outlook 2003 move from Exchange 2007 to Exchange 2010, Outlook clients will fall back to polling which by default only gets notifications every 30secs-1min. This means any change won’t show up immediately.

UDP notification support was removed from Exchange 2010. As a result, Outlook 2003 can only use polling notifications in online mode, which are still supported by RPC Client Access. This will result in a slight delay in updates to item status (30 seconds on average up to a 1 minute delay) when changes are made to items in a mailbox accessed by Outlook 2003.”

The fix:

Method 1: Install Update Rollup 1 for Exchange Server 2010

Important This method contains steps that tell you how to modify the registry. However, serious problems may occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For more protection, back up the registry before you modify it so that you can restore the registry if a problem occurs. For more information about how to back up and then restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

You can download Update Rollup 1 for Exchange Server 2010 from the following article in the Microsoft Knowledge Base:

976573 Description of Update Rollup 1 for Exchange Server 2010

After you install the update, you must add the following registry data to the server by using the Client Access role.

1. Start Registry Editor.  
2. Locate and then click to select the following registry subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeRPC\ParametersSystem Create the \ParametersSystem

   Note

   registry subkey if it does not exist.
   

3. Add the following registry data to the server:Value type: REG_DWORD
   Value name: Maximum Polling Frequency
   Value data: any integer between 5000 and 120000 (decimal value)

4. Exit Registry Editor.

Notes

• The registry change is dynamically detected. Therefore, the new settings will be applied to any new connections that clients make after the change is made. If you want to make sure that the new settings are applied to all clients, you should recycle the Microsoft Exchange RPC Client Access service because connections from clients can remain alive for a long time.
• Outlook 2003 does not poll the Exchange Server 2010 server in intervals that are less than 10 seconds. Therefore, any value less than 10000 will generally have the same effect.
• This change does not reinstate UDP communication between Exchange Server 2010 and Outlook 2003. This change only enables polling to occur more frequently between Exchange Server 2010 and Outlook 2003.

Microsoft KB - link

After migrating from Exchange 2007 to Exchange 2010, workstations running Outlook in cacheded mode were not getting latest version of the GAL. When manually trying to download offline address book within Outlook, it would just hang. From the EMC, I checked the name of the OAB (Org, Mailbox, Offline Address Book (tab)), and noticed it wasn’t named the default ‘Default Offline Address List’. In this case it was called ‘KTS Offline Address List’. Shame on us for trying to personalize… ha!

Anywho, renamed OAB to ‘Default Offline Address List’, did a right-click + update on the OAB… and then tried manually downloading the OAB from Outlook again and this time it took about 10 seconds. Outlook GAL was now up-to-date and even a post in my event log (app) ‘OAB Download Succeeded’.

There is an issue with installing SP2 for Exchange 2007 on SBS 2008, Microsoft has released a tool to get passed the errors - link. You need to download and extract Exchange 2007 SP2 - link, run the install tool. It will ask for the directory of SP2, and then you install SP2 normally.

Here are more details of the issue on MSExchange.org

A client wanted to setup a rule to send an automatic reply to an email address that wasn’t being used any longer. The solution was to create an Outlook rule (server-side) that would reply to the message using a specific message and forward the message to another recipient. First create a new user and email address that you want to autoreply.

Outlook:

Create a rule to have Exchange Server send an automatic reply

1. On the Tools menu, click Rules Wizard.
2. In the Apply changes to this folder list, click the Inbox you want to create the rule for.
3. Click New.
4. Click Start from a blank rule.
5. Click Check messages when they arrive, and then click Next.
6. In the Which condition(s) do you want to check list, select the From people or distribution list check box.
7. In the Rule description list, click the underlined phrase, people or distribution list.
8. In the Type name or select from list box, type the name of each person you want to receive the custom reply, and click From after you type each name.
9. Click OK, and then click Next.
10. In the What do you want to do with the message list, select the Have server reply using a specific message check box.
11. In the Rule description list, click the underlined phrase, a specific message.
12. In the subject line and message body, type whatever information you’d like to appear in your custom reply.
13. Click Close, and when prompted to save changes, click Yes.
14. Click Next, and select the check box next to any exception that you want.
15. Click Next, and in the Please specify a name for this rule box, type a name for the rule.
16. Click Finish, and then click OK.

By default, Exchange won’t send automatic replies, here is how to do it.

Exchange 2007

1. Open Exchange Management Console
2. Expand Organization Configuration-> Hub Transport
3. In the right pane select the Remote Domains tab
4. Right click Default and choose Properties
5. On the General tab you can set which type of Out of Office Messages you will allow
   On the tab named “Format of original message sent as attachment to journal report:” you can enable or disable the automatic replying/forwarding

We also went on the old mailbox (that we are autoreplying from) and modified the deliver options (mail flow settings tab) to forward email to another mailbox. This will let send reply emails only to the old email address with the custom autoreply, but anyone who sends to the new email address won’t be bothered by the autoreply. You can also hide the mailbox so it doesn’t show up in the GAL too.

Link to other versions of Exchange too

Here is a great article on how to install Windows 7 or Vista from a USB flash drive. It actually works as described.

http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

We recently implemented a new SBS 2008 server for one of our clients.  A user was going to be working from home and wanted to utilize thier corporate office desktop to get some tasks done.  They were able to authenticate to the Remote Web Workplace webpage successfully,  but were unable to connect to their Windows 7 desktop computer.  Every time they attempted to do so, their account was rejected with an error message: “The logon attempt failed”

I discovered the problem was due to an incorrect setting within IIS.

Here’s what I did to correct the problem:
I went to IIS Manager → Sites → SBS Web Applications → Rpc → Authentication.  There I found only “Basic Authentication” was enabled.

Enabled “Windows Authentication” then ran an IIS reset. When IIS came back online, I was able to connect via TS Gateway to the server and at least one workstation. I connected and disconnected multiple times and it had no problems. The end user verified they were also able to authenticate without error, and gained remote control of their Windows 7 computer.